G3 is a water purifier with the same function and exactly the same filter cartridges as the G2, but with an extra filter house and cartridge. It is a very handy, effective and customizable water purifier that is easy to use for the whole family. Based on the high-tech filtration technology Microspiralfilter, combined with an insert of choice and an extra cartridge, G3 can adapt to water hardness of soft to very hard water. Thanks to its dual purification capabilities, G3 can be further modified to achieve an even wider purification or to target a specific substance that is problematic in the water. When you want crystal clear water to drink, brew coffee or tea, cook food e.t.c. you just turn on the G3 tap and out it flows. G3 is easy to clean and change the filter in.
 
Installation: Directly on the cold water pipe under the sink, for example. A separate tap (included) is installed on the sink and that's where the cold purified water comes out. You can also run an extra pipe to a so-called side-by-side refrigerator with a water dispenser, to get a proper purification of the water there as well. Hoses and tap  are included.
 
Filtration capacity: 2-3l/minute for optimal filtration. Depending on the quality of the incoming water, the duration of the microspiral filter varies, but usually the filter lasts between 5-10,000 liters. There is also an option to extend the filter capacity by regenerating the filter using a method described under the category "Water purification", subcategory "Operating instructions" on our website (front page). You can repeat this procedure and in some cases get the filter to last up to 25,000 liters. However, it requires that you change the insert at each regeneration because the insert can't be regenereated and has a lower capacity of 1600 liters. The entire filter cartridge (including insert – which is included in the cartridge) should in any case be replaced after at least one year for best function. Should you notice that the flow decreases drastically or that taste and smell deteriorate, you may need to change earlier. Replacement cartridges and inserts for G1 can be found in the "Replacement Cartidges" and the "Replacement Inserts" category.
 
Dimensions: Height 32cm, Width 24cm, Depth 14cm.