G1 is a freestanding water purifier for the sink top that you connect to the kitchen faucet. It is a very handy, effective and customizable water purifier that is easy to use for the whole family. When you want crystal clear water to drink, brew coffee or tea, cook food e.t.c. you just turn a knob. Based on the high-tech filtration technology Microspiralfilter and combined with an insert of choice, G1 can adapt to water hardness of soft to very hard water.  G1 is easy to clean and change the filter in. 
 
Installation: On kitchen faucet with external thread M22x1 or inner thread M24x1. Adapter included. If your faucet has a different size of thread, you may need a universal adapter that can be found in the "Spare Parts" category.
 
Filtration capacity: 2-3l/minute for optimal filtration. Depending on the quality of the incoming water, the duration of the filter varies, but usually the filter lasts between 5-10,000 liters. There is also an option to extend the filter's capacity by regenerating the filter using a method described under the category "Water purification", subcategory "Operating instructions" on our website (front page). You can repeat this procedure and in some cases get the filter to last up to 25,000 liters. However, it requires that you change the insert at each regeneration because the insert can't be regenereated and has a lower capacity of 1600 liters. The entire filter cartridge (including insert – which is included in the cartridge) should in any case be replaced after at least one year for best function. Should you notice that the flow decreases drastically or that taste and smell deteriorate, you may need to change earlier. Replacement cartridges and inserts for G1 can be found in the "Replacement Cartidges"  and the "Replacement Inserts" category.

Dimensions: Height 33cm, diameter (at the bottom) 14cm.